This is a guide that shows how to install Monta on your charge point. If you want to connect your charge point to your Monta account, please follow the steps in the end of the guide.
Please note that when you connect your charge point to Monta, we become the operator of the charge point. This means that you need to use Monta to control the charging process.
You will need to connect to the WiFi (hotspot), which is emitted from your charge point. All EVC04-Models have a WiFi hotspot feature which is enabled by default.
The credentials for the access of the internet signal of your charge point is standardly:
WiFi name or SSID: Malmbergslader
2. Open your browser to 192.168.1.10
After connecting to the "Wi-Fi Hotspot” network, you can open your web browser from a computer or mobile device.
In the URL section, enter 192.168.1.10, which is the IP address of the charging station.
3. Login to the Web User Interface
Once you enter the URL, you will go to the WebUI login page. The credentials are the following:
User Name: admin
4. Go to "OCPP settings" and enable "OCPP connection"
Once in the WebUI, go to "OCPP settings" and enable the "OCPP connection". After that you have to fill in the following details:
Central system address: ws://ocpp.monta.app
Charge Point ID: *your charge point serial number here*
Scroll down on the screen.
FreeModeRFID: 8 capital F’s FFFFFFFF
5. Connect your charge point to the Internet
Now it is time to connect your charge point to the Internet. To do so, navigate to the "Network interfaces" section and select "WLAN".
SSID: *your WiFi’s exact name*
Password: *your WiFi's password*
After you have filled the information, please click on "Save".
6. Connecting the charge point to your Monta account
Now you need to add and connect your charge point to your Monta account.
You can do this through either the Monta app or Monta Portal.
Here is a guide for the Monta app.
Here is guide for Monta Portal.