Please note that when you connect your charge point to Monta, we become the operator of the charge point. This means that you need to use Monta to control the charging process.This guide only applies for ABB AC charge points.
1. Download the TerraConfig(legacy) iOS or Android app on your phone
Note: You must be within 10 feet of your device in order to connect to Bluetooth for configuration
2. Create a new account and login
3. Pair the device
Once logged in, you will need to pair to the device. Click on the "Connect Charger" button.
4. Insert pin code
Then you should see a screen where you can select from multiple charge points. Go ahead and click on the charge point you are trying to connect. After this, you will need the PIN CODE that can be read on the sticker located on the front panel of your ABB charge point.
5. Check connection to network
Once paired, it's necessary to check if the device is properly connected to a network. Click on the "Charger Link" icon.
6. Verify device connection
Verify that the device is connected to a
Wifi network. After this head back to the main menu.
7. Go to OCPP Server
At the main menu, you will continue to the "OCPP Server" section by clicking on the button.
8. Locally cached server
In the OCPP section, you will see an empty list. Above that list you should see "Locally Cache Server +".
Go ahead and click on the "+" icon.
9. Select the Monta OCPP Server
Select the list item with value ocpp.monta.app:443
After this, click on the "Download" button at the bottom of the screen. This should take you back to the OCPP menu.
10. Click on the server
Now the list should no longer be empty and you should have at least one item in the list with the name Monta and the following value: ocpp.monta.app:443
Click "Next" to continue.
11. Enable external access
Once you arrive at the configuration menu you might need to turn on the "Enable external access" toggle switch.
Note: At this point you should save the "Serial Number" you see in this section. You will need this information later, when you are connecting your charge point with Monta.
Click on the "Configure" button.
12. Check if configuration is correct
Very important! You MUST leave the "Change charger name" field empty!
On this page, you can see if the process has been successful. Check for the three checkmarks:
If any error occurs, please go to the main screen and retry from step 5. Otherwise take a screenshot of the error and forward it to Monta support.
If everything is correct, click on "Okay".
13. Connecting the charge point to your Monta account
Now you need to add and connect your charge point to your Monta account.
You can do this through either the Monta app or Monta Portal.
Here is a guide for the Monta app.
Here is guide for Monta Portal.